WheelTracker Models 5945 and 5949

WheelTracker Standard and Premium

There are two versions of this piece of equipment—the Standard WheelTracker (Model 5945) and the Premium WheelTracker Model 5949. (The Premium WheelTracker is shown here.) 

The WheelTracker is manufactured out of about 93 percent stainless steel and it is used to test the wearability and water damage potential of asphalt mixes.

By simulating roadway conditions in a controlled environment and using a Linear Value Displacement Transducer to measure deformation of a sample over 11 equally spaced points at 158 lbs. of pressure (adjustable).


The Balluff Linear Variable Differential Transformer (LVDT) transducer supplies robust and accurate rut depth measurements. It works with the index plate to generate root-mean-square error (RMSE) values significantly below AASHTO standards for rut depth measurements.

The Index Plate provides laser accuracy for location of rut depth measurements and works with the Balluff LVDT transducer to generate RMSE values significantly below AASHTO standards for rut depth Measurement

The WheelTracker has a variable-speed motor and slider-crank mechanism that generates RMSE values significantly below AASHTO standards for sinusoidal motion, and lasts longer than a Scotch yoke mechanism.

Temperature control allows you to test at a variety of temperatures, from 77oF to 158oF (25oC to 70oC).

TroxLiftTM provides a compact lifting method and is easy to use. TroxSafeTM stops the machine quickly to prevent injury, and rapidly resets to allow testing to continue.

Troxler 5945 Premium Wheeltracker


The testing environment temperature can be set between 15°C-70°C and cannot be set less than room temperature. The machine has three testing modes: wet, dry, and an optional air heat. The whole system is controlled by a PC & PLC system with easy-to-use, custom-designed software on a Windows computer. If you have any questions about the WheelTracker, please contact your Troxler representative.

Get in touch today by phone or send us a message using the contact form below.

Call +61 3 9404 2610

5 + 15 =